Hello everyone; i am needing some help with a issue on the IKON CPP650 (Bizhub Pro C6500), that is giving me the codes C-5003 and C-5005 that are problems on the 24V and 12V lines, i've measured these lines and, the voltage is ok, the ACDB is ok and so the PWBM (I have two of them and have exchanged)
First, let me explain what i have done:
1 - The machine was running well but didn't do the duplex print, because of the exit solenoid wasn't actuating, so the paper never went to duplex, and before when it was working, the reverse motor was not running well.
2 - I've made some tests, that includes exchanging the reverse motor with the loop motor and the exit solenoid with the Bypass pick-up solenoid; so, i came to the result, that the solenoid was ok, but the motor wasn't, it was running with a very strange and loud noise;
3 - I've put back all the pieces on their place... and.... the machine stuck on a C-3102 code (error on PS16 cannot measure the fuser home position), after hours i realized that the CDB wasn't powering up, the leds on it was all off, so i've started to check all the wires, and everything was ok, so a friend of mine told me to chech the "Fusistors" on the board have the Acronym "ICP".
4 - After cheking these components, i've saw that some were fine (the ones with the code SOC T2000, SOC T2500 and 1.0A) and some others weren't (SOC T5000 and 2.3A), i don't realy know what are these components, to me, they looks like fuses, so this friend told me to replace these components for a jumper (because i didn't find anyplace that sell its)
5 - After all the things the board started again, but somehow the leds are blinking very fast at the machine power up, then the blink slow down after some seconds, and the machine gives the codes C-5005 and C-5003 (i have two CDB, Both have ICP problems but in diferent places, each board give me a code C-5003 or C-5005).
so, i really need some help about these components, if someone can help me with some idea on wich other component i can use to replace then and/or other components that i've to check.
the reverse motor was in short-circuit, so i think that it have messed with the 2 CDB boards.
i know that the best way to fix it is changing the CDB, but it will take so many days or months to get here in Brazil.
i had one local dealer that charged me on R$5000,00 for the whole ADU and i have to return my ADU back to him, but mine is with brand new pieces like the registration roller and 2nd transfer, and i know that's a bad deal.
Thanks in advance.
First, let me explain what i have done:
1 - The machine was running well but didn't do the duplex print, because of the exit solenoid wasn't actuating, so the paper never went to duplex, and before when it was working, the reverse motor was not running well.
2 - I've made some tests, that includes exchanging the reverse motor with the loop motor and the exit solenoid with the Bypass pick-up solenoid; so, i came to the result, that the solenoid was ok, but the motor wasn't, it was running with a very strange and loud noise;
3 - I've put back all the pieces on their place... and.... the machine stuck on a C-3102 code (error on PS16 cannot measure the fuser home position), after hours i realized that the CDB wasn't powering up, the leds on it was all off, so i've started to check all the wires, and everything was ok, so a friend of mine told me to chech the "Fusistors" on the board have the Acronym "ICP".
4 - After cheking these components, i've saw that some were fine (the ones with the code SOC T2000, SOC T2500 and 1.0A) and some others weren't (SOC T5000 and 2.3A), i don't realy know what are these components, to me, they looks like fuses, so this friend told me to replace these components for a jumper (because i didn't find anyplace that sell its)
5 - After all the things the board started again, but somehow the leds are blinking very fast at the machine power up, then the blink slow down after some seconds, and the machine gives the codes C-5005 and C-5003 (i have two CDB, Both have ICP problems but in diferent places, each board give me a code C-5003 or C-5005).
so, i really need some help about these components, if someone can help me with some idea on wich other component i can use to replace then and/or other components that i've to check.
the reverse motor was in short-circuit, so i think that it have messed with the 2 CDB boards.
i know that the best way to fix it is changing the CDB, but it will take so many days or months to get here in Brazil.
i had one local dealer that charged me on R$5000,00 for the whole ADU and i have to return my ADU back to him, but mine is with brand new pieces like the registration roller and 2nd transfer, and i know that's a bad deal.
Thanks in advance.
Comment