hi all,
my clients C 350 dose not complete the warmup sequence it just show ready to copy.when the print is release the data shows in the job list but shows paper jam error but no paper inside. the machine is completly silent the engine dose not run. i have changed PWB MFP and PWB MC but the status of the machine is the same. any help and suggestions?
my clients C 350 dose not complete the warmup sequence it just show ready to copy.when the print is release the data shows in the job list but shows paper jam error but no paper inside. the machine is completly silent the engine dose not run. i have changed PWB MFP and PWB MC but the status of the machine is the same. any help and suggestions?
They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
Comment