C25 report scanning

[BrunoIT]

Excuse for my english

Can i eliminate the printing of the transmission report in scans without removing the fax report on TX?

the customer is annoyed by the unnecessary paper consumption due to this report

[emujo]

Re: C25 report scanning

1st thing get a manual...soft switch 48 bit 7/6 if bit 7 is 1 and bit 6 is 0 report is generated on error, if bit 7 is 0 and bit 6 is 1, no report is generated. Emujo

[SmellsHot]

Re: C25 report scanning

1st thing get a manual...soft switch 48 bit 7/6 if bit 7 is 1 and bit 6 is 0 report is generated on error, if bit 7 is 0 and bit 6 is 1, no report is generated. Emujo

That's not very nice Emujo

I think he's asking for turning off the tx report for scanning, but not for faxing. I believe this dipswitch only toggles off both settings.
I have a few customers that always want a tx report for faxing, so unfortunately they get one when scanning .....clicks, clicks, clicks....

[emujo]

Re: C25 report scanning

Come on...I've been much worse than that...and he needs to get a manual...how many times do we have to research the answer for someone..no offense to the original poster...Emujo