Hallo at all,
after power-on, the display begins to light, the info "please wait" appears and the scanner moved approximately 1 cm to the right side, the exposure lamp lit for a moment, the display goes out and after few seconds the same procedure repeated until the scanner reached the right side and the drive belt skips.
What could cause this symptom?
after power-on, the display begins to light, the info "please wait" appears and the scanner moved approximately 1 cm to the right side, the exposure lamp lit for a moment, the display goes out and after few seconds the same procedure repeated until the scanner reached the right side and the drive belt skips.
What could cause this symptom?