Error code c0101

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • quitech
    Technician

    50+ Posts
    • Jul 2013
    • 82
    #1

    [Error Code] Error code c0101

    Dear friends,
    Greeting to you all friends,please i need help for Bizhub c6500, flashing error code c0101.please what can i do to make this machine work?
    your contribution will be highly appreciate.
    Thanks, quitech.
    Tags: None
    • emujo
      Field Supervisor

      2,500+ Posts
      • Jun 2009
      • 3009
      #2
      Re: Error code c0101

      You don't even have the manual for this and you want assistance with working on a VERY labor intensive and complicated/delicate production MFP....??? Well your code is related to a paper feed motor issue. It could be the motor, PCB, wiring , power supply, or a sensor. Good luck, I hope when the inevitable "I now have XXXX problem when I tried to fix my machine" you don't get a lot of support....Call a qualified tech...Emujo
      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        • mikeena
          Branch Technical Manager

          100+ Posts
          • Mar 2007
          • 218
          #3
          Re: Error code c0101

          Originally posted by quitech
          Dear friends,
          Greeting to you all friends,please i need help for Bizhub c6500, flashing error code c0101.please what can i do to make this machine work?
          your contribution will be highly appreciate.
          Thanks, quitech.
          i agree if you have never took the fuser apart it is going to be hell. sorry chances are likely it will be the motor causing the issue however i just had this code in my print shop that is at my home office it ended up being the bearings and they were frozen up. So my questions to you would be what is the meter count? Has the fuser ever been rebuilt? has bearings ever been replaced? if you spend the fuser handle is it a tight spend or more loose? if unsure replace motor

            Comment

            • quitech
              Technician

              50+ Posts
              • Jul 2013
              • 82
              #4
              Re: Error code c0101

              Originally posted by emujo
              You don't even have the manual for this and you want assistance with working on a VERY labor intensive and complicated/delicate production MFP....??? Well your code is related to a paper feed motor issue. It could be the motor, PCB, wiring , power supply, or a sensor. Good luck, I hope when the inevitable "I now have XXXX problem when I tried to fix my machine" you don't get a lot of support....Call a qualified tech...Emujo
              Hi emujo thanks for your post, really i don't know much about this machine because i am kyocera mita tech.. i just want to help the owner because he don't know where to fine qualified tech...in my country,i decided to assist him instead of him to pack the machine which he spend a lot of money to purchase,i will go and check what you advice me to check, but i don't know which of the PCB am going to check .
              Tnks, quitech

                Comment

                Previous template Next
                Working...