Bizhub C203 Waste Toner Pipe cleaning?

[ivovb]

Re: Bizhub C203 Waste Toner Pipe cleaning?

Work around? I guess you could somehow retro fit an external waste toner system that bypasses the broken internal one? Haha, no.. No workaround really.

Ha-ha, very funny. I mean is there any solution how to cool down effectively fuser unit near pipe? My experience from Toshiba reminds me about a problem with recycled toner of eS810. Is it possible to make pipe to work more time in order to transport waste toner fluently?

BR

[MVPunisher]

Re: Bizhub C203 Waste Toner Pipe cleaning?

Fix for the waste toner issue right here...

[copierwhisper]

Re: Bizhub C203 Waste Toner Pipe cleaning?

Oh...I've been where you are with that machine. I requires a tremendous amount of work, you have to take the machine so far apart just to get to the pipe and it is likely the machine will not go back together without adding more issues. I have read many posts from other techs with the same issue on this model, many of them said they tried to take it out and they could never get the machine to work right again. We pulled the machine out of the field, too much tear down for a customers office. Good luck! We ultimately chose to replace the machine and pray to never have that problem again...