If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
FS-526, SD-508 How to do Half-fold skew adjustment
FS-526, SD-508 How to do Half-fold skew adjustment
I have one of these units mounted on a Bizhub C552, it's the Bookletmaker Finisher. The folds are a little crooked and I cant find the adjustment anywhere in the service, or installation manual for the SD-508. Any help would be appreciated!
Re: FS-526, SD-508 How to do Half-fold skew adjustment
it is a mechanical adjustment in service manual for the finisher/sd unit.
look at the stacking unit and at the bottom is plate the paper rest on. that is what needs to be adjusted.
Comment