Hi guys,
ive been working on this problem since tuesday..
monday my client tested and print on proof copy, print is good!
then tuesday they suppose to run the cover page
and i attached the output.. the checked part is the mondays proof print,
and the large circle and small circle is the problem in output, plus the difference in color on other side..
comments and suggestions are appreciated that much!
i swap the drum in any colors: same output
change Dev unit yellow since the output is missing a yellow area: same output
today, i play with experts settings and formated fiery: same output
machine is ineo/BH C6500
ive been working on this problem since tuesday..
monday my client tested and print on proof copy, print is good!
then tuesday they suppose to run the cover page
and i attached the output.. the checked part is the mondays proof print,
and the large circle and small circle is the problem in output, plus the difference in color on other side..
comments and suggestions are appreciated that much!
i swap the drum in any colors: same output
change Dev unit yellow since the output is missing a yellow area: same output
today, i play with experts settings and formated fiery: same output
machine is ineo/BH C6500
Comment