[Misc] Replacing fuser unit Konica Minolta Bizhub C450

[Guest]

Hello to all,

I've a Konica Minolta BizHub C450 (european version) with Fierry/EFI controller.
Cause one of the rollers in the fusing unit is peeling of i need to replace the whole unit with a new one.

Can anybody please help me?
I need a schematic or need the steps for replacing this unit.
Have release the 2 screws in front, but the left side of the unit is still blocked. Won't want to damage this unit, so what do i wrong.....?

Thanks for your help!

Ed

[laitang]

Re: Replacing fuser unit Konica Minolta Bizhub C450

Reference attach document

[eddamen]

Re: Replacing fuser unit Konica Minolta Bizhub C450

Reference attach document

Thanks a lot! That will help me.

Ed