C352 fuser wiring

[fatb2]

When i was removing the fuser unit I broke off a couple of wires on connector #32 the 16 pin connector that is on the main body in the exit unit. My problem is that I can not find the part number for this wiring harness in the parts manual. Any help would be greatly appreciated.

[laitang]

Re: C352 fuser wiring

Here you are:

BIZHUB-C352_Fusing.JPG

[fatb2]

Re: C352 fuser wiring

That is not the ones I am looking for. The one I am looking for is the white connector on the back of the fuser unit. I can find it in the service manual but not in the parts manual. It goes from the fuser unit to the mfpb.

[Blizzoo]

Re: C352 fuser wiring

Take a look at this one

[fatb2]

Re: C352 fuser wiring

That is the one i am talking about. What I can't do is find it in the parts manual to order the harness.

[Blizzoo]

Re: C352 fuser wiring

Check on page 81 -Power Unit item 31 if fits.

[Synaux]

Re: C352 fuser wiring

Super glue, duct tape and maybe some solder!