I know the old DV610 works well for both the C6000/7000 and the C5500/6500. The new DV617 is said to require both a firmware upgrade and changing a few dip sw settings to work on the C6000/7000.My question is how can it work with the C5500/6500, or is it a simple no-no for these machines. Thanks all.
New Developer DV617 compatibility?
Collapse
X
-
Re: New Developer DV617 compatibility?
VERY IMPORTANT
The new type developer can be used only with C7000/C6000/C70hc series, not with C6500/C5500 series, C5501/C6501/C65hc series, or C8000.
The technologies of the new type developer are based on the study of newly developed products such as NEW C1070/C1060
BYEComment
-
Re: New Developer DV617 compatibility?
VERY IMPORTANT
The new type developer can be used only with C7000/C6000/C70hc series, not with C6500/C5500 series, C5501/C6501/C65hc series, or C8000.
The technologies of the new type developer are based on the study of newly developed products such as NEW C1070/C1060
BYEDgtalComment
-
Re: New Developer DV617 compatibility?
the dv 617 were born for 2 reasons:
- 1. SC-2814 occur on the engine
2. Light banding in CD / Uneveness
these are the reasons:- Case A) Replace developer from old type to new type and install new firmware
- Case B) Installing only new FW to the new developer installed machine (new developer were already installed the machine and prints has been made.)
- Case C) Occurrence of SC-2814 without filling in new developer
There is no change with the black developer DV-610K
byeAttached FilesComment
- 1. SC-2814 occur on the engine
Comment