KM c353 TRANSFER BELT

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • visaliagraph
    Technician
    • Sep 2014
    • 17
    #1

    KM c353 TRANSFER BELT

    I'm having trouble identifying what is ruining my transfer belts. (Total noob here by the way). Posted are a couple of pics of the issue. My transfer belts get worn on one side. I replaced it about a month ago and its bad again. Weird thing is it only prints bad from the bottom tray. When I print to tray 2 same size paper its fine. Thanks for anybody's help!

    . IMG_0404.jpgIMG_0405.jpg
    Tags: None
    • JSC
      Gimp

      500+ Posts
      • Dec 2006
      • 618
      #2
      Re: KM c353 TRANSFER BELT

      Originally posted by visaliagraph
      I'm having trouble identifying what is ruining my transfer belts. (Total noob here by the way). Posted are a couple of pics of the issue. My transfer belts get worn on one side. I replaced it about a month ago and its bad again. Weird thing is it only prints bad from the bottom tray. When I print to tray 2 same size paper its fine. Thanks for anybody's help!

      . [ATTACH=CONFIG]27170[/ATTACH][ATTACH=CONFIG]27171[/ATTACH]
      Looks like dev from the black iu to me.....
      The gene pool could use a little chlorine.

        Comment

        • visaliagraph
          Technician
          • Sep 2014
          • 17
          #3
          Re: KM c353 TRANSFER BELT

          Originally posted by JSC
          Looks like dev from the black iu to me.....
          Right on the money JSC. Thank you. Time for new imaging units. $1400 for a set, cheaper anywhere else?

            Comment

            • STACVB
              Technician
              • Nov 2013
              • 10
              #4
              Re: KM c353 TRANSFER BELT

              Toner Konica ?

                Comment

                • allan
                  RTFM!!

                  5,000+ Posts
                  • Apr 2010
                  • 5462
                  #5
                  Re: KM c353 TRANSFER BELT

                  Starts with a dirty charge unit on the tank.
                  Whatever

                    Comment

                    • visaliagraph
                      Technician
                      • Sep 2014
                      • 17
                      #6
                      Re: KM c353 TRANSFER BELT

                      Originally posted by allan
                      Starts with a dirty charge unit on the tank.
                      Had a seal yanked out of the black IU. It was developer escaping. I had prolonged the life of the units by chipping thinking what's the worst that could happen ... this can. Live and Burn.

                        Comment

                        Previous template Next
                        Working...