Bizhub C552 - questions / help

[ECA]

Dry Lubricant Spray | PTFE Dry Lube & Solid Lubricants for Corrosion



Looks like the AF sensor (up and down pin on the flat bed is not working) any way to fix?? or is new sensor required?

[allan]

Re: Bizhub C552 - questions / help

there is a whole bulletin for the noise on the fuser. Tried that with all kinds of lubricants and noise would return shortly. Ear plugs is the answer.

[ECA]

Re: Bizhub C552 - questions / help

there is a whole bulletin for the noise on the fuser. Tried that with all kinds of lubricants and noise would return shortly. Ear plugs is the answer.

Have done the power saving feature recommendation of. power save to inmediatally option instead of standard. works good
Just need some lub to sort it out properly


as for the ADF issue. im a bit stumped....

the ADF open sensors and the flat bed vertical rod sensor seem to work. i thought it was the flat bed sensor. so testing it manually, still makes the scanner wake up...

where is the sensor "DF open" in the service mode found?

[habik]

Re: Bizhub C552 - questions / help

It suppose to wake the scanner.


Sent from my iDon't believe in marketing device using Tapatalk

[habik]

Re: Bizhub C552 - questions / help

You realise that version assembly has been superseded to the now black roller version ? the c452 series part number fits and works in the c451 series too.

Has it been superseded due to squeaks or different matter? Haven't noticed any part bulletin.


Sent from my iDon't believe in marketing device using Tapatalk

[ECA]

Re: Bizhub C552 - questions / help

It suppose to wake the scanner.


Sent from my iDon't believe in marketing device using Tapatalk

where is this sensor...
20141211_084121.jpg
thats the one causing the machine to think the ADF is open?
So i can't insert any paper into the ADF, as it will say the compartment is open :/

[emujo]

Re: Bizhub C552 - questions / help

Rs201 location.pdf

Here you go..Emujo

[ECA]

Re: Bizhub C552 - questions / help

[ATTACH]27393[/ATTACH]

Here you go..Emujo

Awesome thanks
hidden magnet switch wasn't lined up with top.

all fixed, just the squeak to go.

thank you for all your help.
no doubt i'll be back

[emujo]

Re: Bizhub C552 - questions / help

hidden magnet switch wasn't lined up with top.

Who'd have thought!!! Emujo