IP 422 Konica 7022 password?

[Jehu]

I finally got around to trying to get this thing to work again. I set it aside when I went to Windows 7. I found out that Microsoft has a driver that will work so I want to give it a try. I bought an IP422 on Ebay for about $50. It took me a while to learn how to set the IP address. The problem is, in order to save the new settings, I need a password. Does anyone know if there is a default password? Is it possible to do some kind of factory reset or read it from the CF card?

Any help would be greatly appreciated.
Jon

[barratec]

Re: IP 422 Konica 7022 password?

hi! try this: sysadm

[Jehu]

Re: IP 422 Konica 7022 password?

hi! try this: sysadm

That was it. Thank you.

[Jehu]

Re: IP 422 Konica 7022 password?

I've got it communicating now. As near as I can figure, this one doesn't have the PS module. Is that something that can be acquired and loaded onto the CF card? or is it a hardware thing?

I'm using the Di552 PCL5e driver but, if I can get the PS going, I should be able to go back to the Microsoft version for the Konica 7022.