bizhub c352 memorizing setting

[cristian]

How could i memorize the settings that i make in the function controll (setting the density and the background removal), at an Bizhub C352?
Thank you.

[allan]

Re: bizhub c352 memorizing setting

First change the functions the way you want and then.
Utility -> user settings -> copy settings -> current settings

[cristian]

Re: bizhub c352 memorizing setting

First change the functions the way you want and then.
Utility -> user settings -> copy settings -> current settings

Sory but it didn t work.
Utility -> user settings, OK, but after that i have no copy settings, only the copier settings. And, in the initial settings i have allready marked - current setting . After the job done with the new settings, the settings ( marked with a point upon the cases....) come back as initial...

[allan]

Re: bizhub c352 memorizing setting

I do apologise for that it is not like the newer machines.

Got this from manual

Initial Setting• It will not be displayed when the following setting shows that authentication device or
vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
8.5.4 Copier Setting
A. Auto Paper Select for Small Original
B. Auto Booklet ON when Fold & Staple
Functions • To register the default setting for the copy mode function, the scanner mode function,
and the fax mode function.
* The machine is initialized at the following timings:
• The main power switch is turned ON.
• Panel is reset.
• In an Interrupt mode.
• Auto Reset
• The password entry screen for account track is changed.
Use • To change the Initial mode setting to meet the user’s need.
Setting/
Procedure
<Current Setting>
• To register the copy mode, scanner mode, or fax mode set on the panel.
• Carry out this setting after the necessary setting for each mode.
<Factory Default>
• Mode set prior to the shipping.
• The corresponding setting will be the one which has been set prior to the shipping by
carrying out this setting from each mode screen.

This is just default mode

[allan]

Re: bizhub c352 memorizing setting

Registering copy programs (Mode Memory)
Up to 15 copy programs can be registered.
A name of up to 16 characters can be specified for the registered copy programs.
To store a copy program
1 Using the touch panel buttons and control panel keys, specify the copy
settings to be registered in the copy program.
? Can the current settings be checked?
% To check the currently specified copy settings, press the [Mode
Check] key.
2 Press the [Mode Memory] key.
The Recall Copy Program screen appears.
3 Touch [Program Registration].

Hope this helps

[cristian]

Re: bizhub c352 memorizing setting

[QUOTE=allan;453692]I do apologise for that it is not like the newer machines.

Should be easier than that...Basiclly what i want:the density and the background removal are show as a scale set usually in the middle and marked with a small point.What i want is to move the setting for those two scales a little bit to the right or to the left, those setting must be permanent, and the points must remain on my setting permanently. Untill now i move manually the values but after i finished the job, or after an reset, the value comes back to the middle.

[allan]

Re: bizhub c352 memorizing setting

Why do you need to do this?

[cristian]

Re: bizhub c352 memorizing setting

Why do you need to do this?

My copier is printing and copying a little bit dark and i want to set it to copy and print more lighter, without changing the settings for each job.The computer interface settings are not working as good as i want to..

[allan]