Really need FieryIC-405/Fiery X3ETY software installation CDs

[tack]

Re: Really need FieryIC-405/Fiery X3ETY software installation CDs

I tried now. The download starts normally. My browser Google chrome If you want, I will upload to another file sharing site.

thank you very much. i tried on a faster connection and i think i have it now.!.
i burned 2 disc iso.
i will try system software re-installation.

Thank you very much for your effort.

[tack]

Re: Really need FieryIC-405/Fiery X3ETY software installation CDs

i tried installation of system software.

i connected my laptop to the fiery with a crossover cable.
made sure both dip switches were in the service mode. (both down)
powered up fiery
proceeded with reinstallation

i get a timeout. apparently no data is being transferred and i have to abort the software install.

anybody have an idea what i may be doing wrong?
do i need to do anything with network settings to connect to the fiery?

Thanks!

[Mick01]

Re: Really need FieryIC-405/Fiery X3ETY software installation CDs

Hi,
The only times I have had this issue when trying to reload are as follows:
My laptop wasn't set to DHCP (had a static IP address set up)
I started the reload procedure before booting the Controller (make sure you follow the on screen instructions exactly)
The controller HDD was stuffed
Im not sure with this Rip (because i haven't tried it) but with the IC-408 and above you can use the USB prep tool to load the fiery system onto a USB stick. You can then use the USB stick to update instead of the laptop.
Hope this helps

[tack]

Re: Really need FieryIC-405/Fiery X3ETY software installation CDs

Hi,
The only times I have had this issue when trying to reload are as follows:
My laptop wasn't set to DHCP (had a static IP address set up)
I started the reload procedure before booting the Controller (make sure you follow the on screen instructions exactly)
The controller HDD was stuffed
Im not sure with this Rip (because i haven't tried it) but with the IC-408 and above you can use the USB prep tool to load the fiery system onto a USB stick. You can then use the USB stick to update instead of the laptop.
Hope this helps

thanks, i am going to get a new hard drive.
maybe that is my problem.
thanks for your reply!

[tack]

Re: Really need FieryIC-405/Fiery X3ETY software installation CDs

I put in a brand new exact same HD

I still get installation timeout.

Anybody have link to usb flash installer software?

Or any suggestions?

[tack]

Re: Really need FieryIC-405/Fiery X3ETY software installation CDs

i finally got the software installed using executable usb flash drive using fiery usb setup tool.

the trick, which does not make sense to me, is that the dip switches have to remain in the normal up position for usb software installation.

switches both down for cd software install.

very odd to me. and why are there 2 switches? there appears to only be to positions, either both up normal or both down service mode.

[LukeBB]

Re: Really need FieryIC-405/Fiery X3ETY software installation CDs

hi,
i am also working on an old km c500.
i need to reinstall software.
does anybody have a source ISO?

[tack]

Re: Really need FieryIC-405/Fiery X3ETY software installation CDs

hi,
i am also working on an old km c500.
i need to reinstall software.
does anybody have a source ISO?

i have it. let me know if you still need it.

[LukeBB]

Re: Really need FieryIC-405/Fiery X3ETY software installation CDs

i have it. let me know if you still need it.

Yes. I still need it.