bizhub 423 with fax kit setting question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • brent
    Service Manager

    Site Contributor
    1,000+ Posts
    • Nov 2008
    • 1148
    #1

    bizhub 423 with fax kit setting question

    so my question is. I have a customer wanting the bizhub 423 to do a distinctive beep so it knows when to pick up for a fax
    I have looked at the display and gone into all the settings. but didn't see exactly what I want
    any suggestions?

    brent

    thank you guys
    Tags: None
    • CraigW
      Trusted Tech

      Site Contributor
      250+ Posts
      • Dec 2010
      • 417
      #2
      Re: bizhub 423 with fax kit setting question

      They do not make any sounds when ringing (was told years ago it was a copyright thing)

      You can hook a phone to the TEL jack, and it will ring on incoming calls.

        Comment

        • emujo
          Field Supervisor

          2,500+ Posts
          • Jun 2009
          • 3009
          #3
          Re: bizhub 423 with fax kit setting question

          Accessibility/Sound settings...Should be able to turn this sound on/off from here (I think it's "completion". The other settings for hearing the dial tone and dial pad are in the FAX line parameters. Emujo
          If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

            Comment

            • brent
              Service Manager

              Site Contributor
              1,000+ Posts
              • Nov 2008
              • 1148
              #4
              Re: bizhub 423 with fax kit setting question

              I have looked at the fax parameters and with the end user that couldn't see what was needed as well.. I am not sure
              what exactly he is after. but he wants the machine to pick up after a second ring.. or something like that.. he wants a short 2 beep ring
              so it will designate to this particular fax. I have a headache..

              thanks for the advice guys

              brent

                Comment

                • CraigW
                  Trusted Tech

                  Site Contributor
                  250+ Posts
                  • Dec 2010
                  • 417
                  #5
                  Re: bizhub 423 with fax kit setting question

                  I saw nothing for "distinctive ring" option for fax kit used in this model (other KMBS models do list it though)

                    Comment

                    • CompyTech
                      Super Tech

                      500+ Posts
                      • Feb 2011
                      • 706
                      #6
                      Re: bizhub 423 with fax kit setting question

                      Originally posted by brent
                      I have looked at the fax parameters and with the end user that couldn't see what was needed as well.. I am not sure
                      what exactly he is after. but he wants the machine to pick up after a second ring.. or something like that.. he wants a short 2 beep ring
                      so it will designate to this particular fax. I have a headache..

                      thanks for the advice guys

                      brent
                      You can't set a distinctive ring from the copier that something he has to get through the phone system but, you can however turn on the "line monitor sound" and set the fax RX no. of rings to however many (I think the limit is 10).

                      These settings are in the fax settings in the administrator menu. Then look under line parameters. (sorry don't remember exactly off the top of my head, but it's in there somewhere). Good luck.

                        Comment

                        Previous template Next
                        Working...