If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
[Jamming]
bizhub c35 jamming from tray 2 and the bypass
Hi guys got a c35 jamming from tray 2 and the bypass the paper gets a quarter of a way through the fusing unit and that's it any idea's. checked exit sensor seems ok.the jam does mention the transfere but had all that out looks ok.Any idea's
Hi guys got a c35 jamming from tray 2 and the bypass the paper gets a quarter of a way through the fusing unit and that's it any idea's. checked exit sensor seems ok.the jam does mention the transfere but had all that out looks ok.Any idea's
Ah the evil that is a C35.......
Check out the attached PDF. I think from page 31 is what your after.
Comment