[Misc] developer calibration for Konica Minolta Bizhub 195

[atech]

Guys, I need information on how to calibrate Konica Minolta Bizhub 195. I need the exact procedures.

Thanks

[allan]

Re: developer calibration for Konica Minolta Bizhub 195

Same as a B211.

Remove toner bottle.
Goto service mode.
Goto counters and clear supplies and maintenance counter for good measure.
Restart Machine (paranoid habit).
Goback and to Adjust.
Goto TCR auto adjust and execute.
Wait about 180 seconds for the gain reading to show (must be around 140 Zen units or if you are really curios 3.624 volts).
exit service mode.
Jobs done.







P.S. Put the toner back