bizhub 600 jaming in duplex showing j1701

[allan]

Re: bizhub 600 jaming in duplex showing j1701

Did you remove the mylars from the duplex entrance. There is pinch rollers you can feel underneath the left side of the ADU remove the u channel and take of the mylars.

Sometimes the whole clear plastic tray needs to be removed disassembled and cleaned there is a black selector gate that also gets sticky or the spring pops of.

in your case i think its the mylars because SEF works.

[Naveed Shahid]

hello every one

bizhub 600 jaming in all trays once try to make duplex its showing j1701 if i try A4 r no jaming but A4 Always jaam if i try 3 copy its ok more then 3 put its jaming and showing j1701

regards