p-14 trouble

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • debby
    • May 2025
    #1

    p-14 trouble

    please i need your help on how to solve the p-14 problem on my boss's c451 bizhub he has tried reseating the K IU and skew adjustment also initialize / stabilization yet no improvement.
    Tags: None
    • hotfuser
      Trusted Tech

      100+ Posts
      • Jan 2014
      • 180
      #2
      Re: p-14 trouble

      Originally posted by debby
      please i need your help on how to solve the p-14 problem on my boss's c451 bizhub he has tried reseating the K IU and skew adjustment also initialize / stabilization yet no improvement.
      Have you loaded A00J0Y0-0050-GC1-22 this problem was fixed with the firmware. P-14 (Skew correction trouble)

        Comment

        • habik
          Service Manager

          Site Contributor
          1,000+ Posts
          • Apr 2010
          • 2013
          #3
          Re: p-14 trouble

          Check the ITB for broken primary transfer roller brackets.
          .OK Google! ... will I need Berrocca this morning?
          Firmwares HERE

            Comment

            • Synaux
              Service Manager

              Site Contributor
              1,000+ Posts
              • Mar 2012
              • 1224
              #4

                Comment

                • Synaux
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Mar 2012
                  • 1224
                  #5
                  Re: p-14 trouble

                  I also had an IC5 chip blow on the Printhead Relay board, replaced the board another one blew. I never could find a cause....

                    Comment

                    • Synaux
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Mar 2012
                      • 1224
                      #6
                      Re: p-14 trouble

                      Originally posted by habik
                      Check the ITB for broken primary transfer roller brackets.
                      ITB?

                        Comment

                        • hotfuser
                          Trusted Tech

                          100+ Posts
                          • Jan 2014
                          • 180
                          #7
                          Re: p-14 trouble

                          Originally posted by Synaux
                          ITB?
                          Image Transfer Belt

                            Comment

                            • Synaux
                              Service Manager

                              Site Contributor
                              1,000+ Posts
                              • Mar 2012
                              • 1224
                              #8
                              Re: p-14 trouble

                              Originally posted by hotfuser
                              Image Transfer Belt
                              Doh!

                                Comment

                                Previous template Next
                                Working...