I've changed several times the Guide plates from Tray1 and Tray 2 , these seems to be fragile and break often .
After some research on the Net found 4 part #'s for "Guide Plate Reinforcement Braces " ( A0ED-5691-00; A0ED-5791-00; A0ED-5692-00; A0ED-5792-00) as these parts are not listed on the Original parts manual , I'm assuming that these are a part of a later Service Bulletin and solve the issue with the guide plates.
We have a good quantity of these machines on the filed and I'm planing to update all of them with these parts (reinforcements) . can anyone confirm that my above assumptions are correct ?
Tks,
Leonardo
After some research on the Net found 4 part #'s for "Guide Plate Reinforcement Braces " ( A0ED-5691-00; A0ED-5791-00; A0ED-5692-00; A0ED-5792-00) as these parts are not listed on the Original parts manual , I'm assuming that these are a part of a later Service Bulletin and solve the issue with the guide plates.
We have a good quantity of these machines on the filed and I'm planing to update all of them with these parts (reinforcements) . can anyone confirm that my above assumptions are correct ?
Tks,
Leonardo
Comment