[Misc] C224 - Factory Reset

[Jorvikps]

Hi Guys,

Just a quick one, I don't suppose there is a magical way of Factory Resetting these devices is there (I don't mean Counter). We have picked up a used C224 from a Dealer and it's all setup to them inc. their own imagery on the startup screen.

Obviously I could flash the firmware, but I'm worried about receiving the dreaded "Licence Management Error" afterwards.

Thanks in advance to anyone who has any ideas.

Thanks

Andy

[allan]

Re: C224 - Factory Reset

Format the HDD and initialize data if necessary. Reload firmware. let me know if that works. These machine does not give license management error they stop working, you will be safe to do these things.

hop that works.

[copier tech]

Re: C224 - Factory Reset

You can easily restore the KM boot screen logo by holding down the yellow reset button while powering on the machine, at the next screen choose delete boot screen logo.

[Jorvikps]

Re: C224 - Factory Reset

Hi Guys,

Thanks for your replies, greatly appreciated.

Yes, I found the restore in Service Mode anyway. I really should of taken the 30 seconds to think about it, instead of just asking.

Thanks

Andy

[Drcopy]

Re: C224 - Factory Reset

Hi Guys,

Thanks for your replies, greatly appreciated.

Yes, I found the restore in Service Mode anyway. I really should of taken the 30 seconds to think about it, instead of just asking.

Thanks

Andy

Where do I find the restore in service mode?

[Drcopy]

Re: C224 - Factory Reset

What is the best way to set everything back to factory default on these Konica machines '4' series? (purchased used and selling to another client)

[copier tech]

Re: C224 - Factory Reset

What is the best way to set everything back to factory default on these Konica machines '4' series? (purchased used and selling to another client)

^^^^^^ Scroll up & read allan's post! ^^^^^^

[Drcopy]

Re: C224 - Factory Reset

Ok so format HDD & initialise data.

Thanx!


Sent from my iPhone using Tapatalk