konica 7050

[Mark B]

does anyone have spec. sheet, product info guide, or something that tells me what finisher goes on this model. We have a couple of these new in box (don't laugh) and I am woundering why this fs 103B will not work but the fs 103 will

[ebm]

does anyone have spec. sheet, product info guide, or something that tells me what finisher goes on this model. We have a couple of these new in box (don't laugh) and I am woundering why this fs 103B will not work but the fs 103 will

7050 take FS-102,FS-103,FS-103A. FS-103B for 7150,7060 model. KMBS has model cross reference lists on MYKONICA page.

[Mark B]

One other problem is the machine picks the original size good through the adf but off the glass I have an 8 1/2 orig and the machine thinks it is an 8 1/2R and I do not remember what causes that

[ebm]

One other problem is the machine picks the original size good through the adf but off the glass I have an 8 1/2 orig and the machine thinks it is an 8 1/2R and I do not remember what causes that

Check photo sensors under glass?

[Mark B]

I just fixed it. It was the size dect sensor. The bracket was a little bent. We stoped selling Konica machines about 8 years ago now we sell Kyocera. I did go to school for the 7050/7060 and even got a silver seal, but that was a long time ago. I do not have access to mykonicaminolta any more.

[Mark B]

Would someone please send to me a 7050 service manual, (my old paper manuals have fallen apart). mbeitler@rtrbusinessproducts.com