P6,7,8,9 and 21

[gulfcartman]

Re: P6,7,8,9 and 21

Glad you resolved the issue. Thanks for posting the solution.

Hey Fixthecopier I just hope to be able to return the favor one day, it was great working with you.
V/R
Alan

[shamnad abdullah]

Re: P6,7,8,9 and 21

Dear Forum
C200 I have tried to bypass image stabilization because I know all consumable items are within specifications. But the machines memory, other than changing the board which I didn't want to do. I have a parts machine here at the office. Anyway is there anyone out there who knows how to get by this image stabilization process.
V/R
Alan

try this
go to service mode (utility-check details-stop-00-stop-01)
go to imaging process adjustment->perform D max density
gud luck

[gulfcartman]

Re: P6,7,8,9 and 21

try this
go to service mode (utility-check details-stop-00-stop-01)
go to imaging process adjustment->perform D max density
gud luck

Dear Shamnad.
With all due respect. I believe your post to be a little behind the curve. Several of us have figured out this devil and made him submit. Read prior post and I believe the picture will be some what clearer.
V/R
Alan

[Synaux]

Re: P6,7,8,9 and 21

What does this PPLM stand for Synaux?

Thanks for the info where can I find this "PPLM"? Chips you are referring about ie;web address, average cost?

I am not actually sure what it stands for. lol
I see people saying it here on the forum though. It is a special firmware to allow the machine to keep running after the IU has exceeded its end of life. Personally, I just call it IU firmware.

You would either need a certified Konica-Minolta tech to install this firmware or find someone that has the firmware and install it OR acquire the firmware and install it yourself (would need the software, firmware, probably a CF card/CF card reader, and would have to set some softswitches in service mode).

I don't really work on these models and I recently lost access to KM's online resources, so it is difficult for me to figure out if this firmware even exists for this model.

[gulfcartman]

Re: P6,7,8,9 and 21

I am not actually sure what it stands for. lol
I see people saying it here on the forum though. It is a special firmware to allow the machine to keep running after the IU has exceeded its end of life. Personally, I just call it IU firmware.

You would either need a certified Konica-Minolta tech to install this firmware or find someone that has the firmware and install it OR acquire the firmware and install it yourself (would need the software, firmware, probably a CF card/CF card reader, and would have to set some softswitches in service mode).

I don't really work on these models and I recently lost access to KM's online resources, so it is difficult for me to figure out if this firmware even exists for this model.

Dear Synaux
I thank you for all the help. If in the future you need access to mykonicaminolta.com I have full access. Be glad to help you out anyway I can.

[gulfcartman]

Re: P6,7,8,9 and 21

try this
go to service mode (utility-check details-stop-00-stop-01)
go to imaging process adjustment->perform D max density
gud luck

Just curious why you haven't responded to the reply I left you on previous quote? You have suggested that I perform D max in service mode.