575
I installed a punch unit on a working finisher and reinstalled the unit on the Bizhub C352. Got a code C1301 (Finishing option cooling
fan motor failure). Any idea how I can fix this. The fan was tested and works fine. Did I blow the control board and if so, what would be the part number to replace it? Thanks for any help.
I installed a punch unit on a working finisher and reinstalled the unit on the Bizhub C352. Got a code C1301 (Finishing option cooling
fan motor failure). Any idea how I can fix this. The fan was tested and works fine. Did I blow the control board and if so, what would be the part number to replace it? Thanks for any help.