[Misc] Bizhub Pro C500 IP-921 won't boot

[rlr42173]

I have a ip-921 internal rip installed in a Bizhub pro c500 copier and the server will not boot. The copier control panel just says either rebooting system or system booting and just hangs.
I would like to know if anyone would be willing to sell the system repair disk or download the pertinent files from the konica minolta website and send them to me either via ftp or disk.
I don't have a konica minolta account and this is just a software corruption issue I believe. Fiery lost power while processing a job, I think...
Thank You for your time and if you are willing to do this I greatly appreciate it and of course I will gladly pay you for your time and materials.
Thanks Again

[jotunn]

Re: Bizhub Pro C500 IP-921 won't boot

Gimme FTP address, I'll upload system software ISO and service manual for your controller.

[rlr42173]

Re: Bizhub Pro C500 IP-921 won't boot

Hello:
Thank You for the reply.
My ftp is below

ftp://copycousa.com

[rlr42173]

Re: Bizhub Pro C500 IP-921 won't boot

Thank You so much Jotunn.
I am transferring the files from the ftp as we speak and will be creating a disk shortly.
You don't know how much I appreciate this.
Let me know what I owe you for your time.
Thank you

[jotunn]

Re: Bizhub Pro C500 IP-921 won't boot

It will take few hours to complete the upload.

You owe me nothing