BH 423 SKEW TRAY 1 ONLY.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • splblazer91
    Trusted Tech

    100+ Posts
    • Jul 2014
    • 204
    #1

    BH 423 SKEW TRAY 1 ONLY.

    A fellow tech has been fight this for a while. prints fine out of all other trays but tray 1 skews the prints. He has replaced all rollers and clutches and the feed guide for tray 1. Still doing it. Any suggestions?
    Tags: None
    • Phrag
      Trusted Tech

      250+ Posts
      • Oct 2012
      • 417
      #2
      Re: BH 423 SKEW TRAY 1 ONLY.

      Is there any folded corners on the bottom of the paper stack?



      Sent from my GT-I9506 using Tapatalk

        Comment

        • allan
          RTFM!!

          5,000+ Posts
          • Apr 2010
          • 5459
          #3
          Re: BH 423 SKEW TRAY 1 ONLY.

          I have heard the hinges on the machine can get bent affecting tray 1 only. I have one of those machine it's got a LCC on so i gave up on it and set the tray priorities to the other two trays.
          Whatever

            Comment

            Previous template Next
            Working...