On a c450 I was getting doubles on all types of sheets, 24# to 10 pt going through tray 1 - the 12 x 18 tray. So I replaced the paper takeout roller and the sheet separator roller. Still happens - but not as often. Am I missing an adjustment?
I checked the shaft that holds the paper take out roller. It is a little sloppy, but was not sure how tight this should be. Could it be the bearing or shaft itself? Nothing looks worn. Any ideas?
Thanks
I checked the shaft that holds the paper take out roller. It is a little sloppy, but was not sure how tight this should be. Could it be the bearing or shaft itself? Nothing looks worn. Any ideas?
Thanks