If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Srdf-1 light won't come on when paper is inserted into the feeder. I tried sim 243 to test motors and sol. No response from anything except feed sol. I swapped with another known good feeder and same thing.
Srdf-1 light won't come on when paper is inserted into the feeder. I tried sim 243 to test motors and sol. No response from anything except feed sol. I swapped with another known good feeder and same thing.
Did it ever work? Is Sim U211 set the the correct DF type.
Yes it worked but was jammimg. I had it apart and it stopped working. I swapped it out and good one does the same thing. I made sure the sim is set for the SRDF-1.
Comment