Kyocera fs 1370 DEVELOPER MISSING message

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rapidocument
    Multibrands Tech

    250+ Posts
    • Jul 2012
    • 381

    #1

    Kyocera fs 1370 DEVELOPER MISSING message

    Kyocera fs-1370 with DEVELOPER MISSING message, I cleaned from unknown toner the developer unit, added good (correct) toner, put a new toner OEM, also cleaned the drum unit from waste toner, machine is clean. machine was recently serviced in my shop.

    Any ideas are welcomed thanks,
    My INSTAGRAM https://www.instagram.com/reparacion_impresoras_oaxaca
  • copydocinc
    Trusted Tech

    Site Contributor
    250+ Posts
    • Mar 2015
    • 263

    #2
    Re: Kyocera fs 1370 DEVELOPER MISSING message

    The machine doesn't think the developer unit is installed.
    check connector points on the dev unit and where it contacts inside the machine or in the drum unit.
    You might have to replace the dev unit.

    Comment

    • Kidaver
      Ghoulscout

      500+ Posts
      • Apr 2011
      • 912

      #3
      Re: Kyocera fs 1370 DEVELOPER MISSING message

      few times we have seen this it was always non OEM toner...and putting in a new OEM toner fixed it...
      "In a cruel and evil world, being cynical can allow you to get some entertainment out of it."

      Comment

      Working...