When receiving a fax this machine will lock up. It will continually show receiving fax and the memory light will blink but It will not print out the fax. Any print jobs sent to the machine during this time will be in the queue waiting for the fax job to print. I can shut off the machine and turn it back on at which time the machine will print out the fax and the print jobs that are in the queue. A few weeks ago it did something similar and I could not get the machine to print out the fax job. I tried changing the fax and fax memory board but at that time but the only thing that worked was an initialization (went into maintenance mode and performed simulation 21). Has any one seen this problem where an incoming fax will lock up the machine.
Thanks in advance
Thanks in advance
Comment