[Jamming] MP/BYPASS TRAY ISSUE.

[bollard]

300GSM cardstock will not feed mp tray (settings been played with etc.)

This has worked up until today , rollers changed to no avail ,feeds everything else but not the 300gsm which is at the peak of the spec for the mp tray.
Has anyone had this issue ? any model ?
Machine in question Taskalfa 7551ci.

[Tonerkiller]

Re: MP/BYPASS TRAY ISSUE.

Will it feed thinner paper? Is the bypass set to auto/inch.

[bollard]

Re: MP/BYPASS TRAY ISSUE.

Will it feed thinner paper? Is the bypass set to auto/inch.

Yes all set correct.

[habik]

Re: MP/BYPASS TRAY ISSUE.

Does it feed at all? Couple of cm? Clutch?

Trimmed mylar once to help feeding.
Have to check if I still have the picture

Sent from my GT-I9300 using Tapatalk

[bollard]

Re: MP/BYPASS TRAY ISSUE.

Does it feed at all? Couple of cm? Clutch?

Trimmed mylar once to help feeding.
Have to check if I still have the picture

Sent from my GT-I9300 using Tapatalk

Next move is clutch possibly motor as well.