KM3530 print/scan

[repeatcopiers]

I have a customer with a KM3530 that is wanting print and scan. I have a KM2530 that has these features. Can anyone tell me what I need to take off the 2530 and put on the other. I do mostly Canons and don't know much at all about these Kyoceras. Any help is appreciated.

[kyoceradude]

You need to remove 3 boards from the 2530 and move them to the 3530. The "print system', the "scanner nic" and the "RTC" pcb (this is the small dimm on the main pcb that has a battery on it.

[repeatcopiers]

You need to remove 3 boards from the 2530 and move them to the 3530. The "print system', the "scanner nic" and the "RTC" pcb (this is the small dimm on the main pcb that has a battery on it.

Thank you, I did that and now I'm getting a C0050 when I push the scanner button.....print seems to be fine. I tried to put the scan nic and RTC pcb back on the other copier and same thing. So I tried to do the 504 initialize mode but still same error.....any ideas?

[B0265]

C0050 indicates that the machine doesn't detect the RTC PCB, perhaps it's damaged?