Kyocera FS1300d wont print last part of LGL document

[rapidocument]

Printer driver is updated, I have chosen different configurations for the machine to print all text in the document,
(tried different documents), however last 4 inches are washed-out to blank print, the printed area is larger than LTR-R but smaller than LGL
I have tried the personalized settings as well with the same results.

any idea is welcomed.

[copiman]

Re: Kyocera FS1300d wont print last part of LGL document

Not 100% sure about this issue but have you confirmed that the printer recognizes that legal paper is in it? In copiers I have seen that the paper size was different than what is in copier.

[rapidocument]

Re: Kyocera FS1300d wont print last part of LGL document

I am seeing that this little machine came with win97 drivers and maybe is a conflict with win7 and win10 enviroments.

Any way I have managed to make it work passing the LGL thru the bypass.
all ok so far.
thankyou guys

[qbert69]

Re: Kyocera FS1300d wont print last part of LGL document

I am seeing that this little machine came with win97 drivers and maybe is a conflict with win7 and win10 environments.

Any way I have managed to make it work passing the LGL thru the bypass.
all ok so far.
thank you guys

If you are using Windows 10, you *should* be able to do print driver isolation!