Fsc2526 washed out

[The Hastings]

Re: Fsc2526 washed out

You have eco print enabled (you can see it on that status page), and that's why it's not so solid in the print itself. The reason your copies are so pale is that you need to clean optical section and bottom glass sides.

Now with eco disabled - New status and copy of it. doc02481520170413105157-page-002.jpgdoc02481520170413105157-page-001.jpg

[The Hastings]

Re: Fsc2526 washed out

Hello,
check visually fixing unit and let us know.

Fuser is good.

[Kyo fan]

Re: Fsc2526 washed out

That looks better on the print, now just give the optical section some good cleaning 1st and than we can point you to some standard adjustments.

[The Hastings]

Re: Fsc2526 washed out

That looks better on the print, now just give the optical section some good cleaning 1st and than we can point you to some standard adjustments.

All new CCD unit. All glass cleaned and inspected. All connections checked.

[Kyo fan]

Re: Fsc2526 washed out

Sorry, i missed that info. When replacing ccd, you need 2 specific and not so cheap charts to do Color calibration of the scanner (U425) and Auto scanner adjustment (U411). One chart is for the DP (part number: 303LJ57010) and the other is for the platen glass (part number: 302FZ56990).

[The Hastings]

Re: Fsc2526 washed out

Sorry, i missed that info. When replacing ccd, you need 2 specific and not so cheap charts to do Color calibration of the scanner (U425) and Auto scanner adjustment (U411). One chart is for the DP (part number: 303LJ57010) and the other is for the platen glass (part number: 302FZ56990).

Have them. Performed all adjustments properly. I just feel like this is something simple we are missing. (Only other option is replacing PWB's at this point.)

[milan]

Re: Fsc2526 washed out

Its look like you have a poor HV.