Kyocera KM C2230 Image Units

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • brewster67
    Trusted Tech

    Site Contributor
    100+ Posts
    • Jul 2011
    • 167

    #1

    Kyocera KM C2230 Image Units

    I'm looking to see if any one knows if the image units in the kyocera km c2230 are compatible with the ones for a konica bizhub c350 or are they chipped differently.

    I have someone that found one of these in a building they bought and want to use it. I got it running but all the image units are flagging for replacement. I'm not finding the kyocera image units from any suppliers I trust but I can find the konica ones.
  • habik
    Service Manager

    Site Contributor
    1,000+ Posts
    • Apr 2010
    • 2013

    #2
    Re: Kyocera KM C2230 Image Units

    ? Kyo to Bizhub.. Never heard of it. Feed roller OK but IU's??


    Sent from my iDon't believe in marketing device using Tapatalk
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

    Comment

    • brewster67
      Trusted Tech

      Site Contributor
      100+ Posts
      • Jul 2011
      • 167

      #3
      Re: Kyocera KM C2230 Image Units

      The kyocera C 2230 is a re-branded KM C350, most of the parts interchange. I just don't know about the drums. It even uses KM diagnostic mode.

      Comment

      • qtech
        Technician

        Site Contributor
        • Jul 2009
        • 41

        #4
        Re: Kyocera KM C2230 Image Units

        Yes, the IU assemblies are the same, but you need to swap out the small circuit board on the front of the unit. Search 'Kyocera KM-C2230' on ebay and you will find them (I bought a few sets, they worked fine). Two screws, exchange the chip board, and you will be good to go.
        Chris

        Comment

        • brewster67
          Trusted Tech

          Site Contributor
          100+ Posts
          • Jul 2011
          • 167

          #5
          Re: Kyocera KM C2230 Image Units

          Thanks for the info.

          Comment

          Working...