Kyocera - Looking for Test chart

[Chicko]

Hello

I Have a Kyocera FS1128 and I accidently put the scanner off setting by doing U411.

I'm looking for test chart / adjustment chart in order to set the machine back to normal scanning.

Adjustment chart numbers

302FZ56990

and

303LJ57010

If someone can upload a high res pdf I will really appreciate it.

Thanks alot

[wragsdale]

Re: Kyocera - Looking for Test chart

I don't think you want to do that. You want to calibrate your scanner from a print of a scan? And this doesn't sound like a bad idea?

[Santander]

Re: Kyocera - Looking for Test chart

Hello

I Have a Kyocera FS1128 and I accidently put the scanner off setting by doing U411.

I'm looking for test chart / adjustment chart in order to set the machine back to normal scanning.

Adjustment chart numbers

302FZ56990

and

303LJ57010

If someone can upload a high res pdf I will really appreciate it.

Thanks alot

How about doing a U021 to get back to the default settings? You may have to re-enter some information, but you would have the scanner settings back to where you want.

[Chicko]

Re: Kyocera - Looking for Test chart

Really? I wasn't sure about trying U021 as I didn't want to cause any other faults. I normally work with Ricoh machines which are different from these.

So you say that this SP Mode will reset the machine back to defaults?

[Chicko]

Re: Kyocera - Looking for Test chart

I don't think you want to do that. You want to calibrate your scanner from a print of a scan? And this doesn't sound like a bad idea?

Yeah I know its not the best idea but if I can get it as close as possible that will be fine