If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i have had GREAT success using "Nu Finish" car polish on charge rollers.. ( everything from Canon - HP - Oki - Xerox - Samsung - Muritec - LexMark - Ricoh ) clean with water.. dry.. coat roller with the polish and buff off... ones with really bad build up.. repeat. Tends to keep build up off and makes the print bolder.
I have also used " Rain-X " on copier mirrors that tend to build up ozone quick.... alcohol first then the rainx
I have also used and still use Nu Finish on certain charge rollers.
Works better than anything being sold in our business, that I know of.
I'll try the rain-x
thanks
Comment