Waste bottle has not been replaced.

[ntbann]

I have a TA3252ci that says " the waste bottle has not been replaced. Have replaced Waste unit, Firmware, And calibrated waste bottle. Problem still remains. Anyone run int this yet? thanks in advance.

[JSC]

Re: Waste bottle has not been replaced.

I have a TA3252ci that says " the waste bottle has not been replaced. Have replaced Waste unit, Firmware, And calibrated waste bottle. Problem still remains. Anyone run int this yet? thanks in advance.

there have been a few bulletins on this, I think it can also come up with waste full when it isn't. The actuator has been redisigned, you have to remove the whole waste bel assy.

i'll have a look in the morning for the bulletin.

[ntbann]

Re: Waste bottle has not been replaced.

I replaced the waste bottle unit with the new style already.

[Kyo fan]

Re: Waste bottle has not been replaced.

The latest firmware disables piezoelectric sensor which should solve it, unless there is something more involved in your case.

[Tonerkiller]

Re: Waste bottle has not been replaced.

I replaced the waste bottle unit with the new style already.

Did you calibrate it?

[ntbann]

Re: Waste bottle has not been replaced.

In my original post I said I replaced the waste unit, updated firmware, and calibrated waste bottle!

[JR2ALTA]

Re: Waste bottle has not been replaced.

Have you updated the firmware?



sorry I had to, haha

[ntbann]

Re: Waste bottle has not been replaced.

Figured it out. U159 waste toner was set to 0. default is +20. No idea how it got changed?