FS-C-8525 MFP-CX, K drum

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Hansoon
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3347
    #1

    FS-C-8525 MFP-CX, K drum

    FS-C-8525 MFP-CX, has a fat black line on the upper short side of an A4 print. So obviously is the K-Drum the reason since all colors are OK. Any special procedure to replace the K-Drum with # 302MY93012, DK 896?

    I'm a KonicaMinolta man with very little Kyocera knowledge. Anything to take care of please? A manual for the FS-C-8525 MFP-CX would be very helpful ofcourse.......

    Thanks

    Hans
    “ Sent from my Intel 80286 using MS-DOS 2.0 “
    https://www.copytechnet.com/images/smilies/biggrin.png
    Tags: 302my93012, fs-c-8525, k-drum, man, mfp-cx
    • zoraldinho
      teacher-guide-expert-guru

      Site Contributor
      2,500+ Posts
      • Mar 2008
      • 4999
      #2
      Re: FS-C-8525 MFP-CX, K drum

      Drum
      Attached Files
      If it ain't broke, don't fix it
      A picture is worth a thousand words

        Comment

        • Hansoon
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Sep 2007
          • 3347
          #3
          Re: FS-C-8525 MFP-CX, K drum

          Thanks!

          Any simulations to be made after, or does it calibrate itself?

          Hans
          “ Sent from my Intel 80286 using MS-DOS 2.0 “
          https://www.copytechnet.com/images/smilies/biggrin.png

            Comment

            • zoraldinho
              teacher-guide-expert-guru

              Site Contributor
              2,500+ Posts
              • Mar 2008
              • 4999
              #4
              Re: FS-C-8525 MFP-CX, K drum

              that's it
              If it ain't broke, don't fix it
              A picture is worth a thousand words

                Comment

                Previous template Next
                Working...