three tier color

[T911]

How do i set this up to show up on the status report as well as the service status page? thanks

[justanotherhack]

Re: three tier color

Simulation U332 set mode to +1. I just set it on a 4052ci and a 5550ci, both machines now show 3 tier when I print a status page. Verify U260 is set to Eject.

[T911]

Re: three tier color

Simulation U332 set mode to +1. I just set it on a 4052ci and a 5550ci, both machines now show 3 tier when I print a status page. Verify U260 is set to Eject.

Great thanks so much. Is that where i set the percentage for level 1,2 and 3. Exp. 2% for 1 4% for 2 and 6% for 3

[itchyfinger@att.net]

Re: three tier color

we set sim 332 as follows mode =1 then 2nd spot 2.5 then the third spot to 5.0 we make out on our contracts pretty well at these settings