Kyocera 6052ci Black copies are Blank

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bryant28282000
    Trusted Tech
    • Jul 2012
    • 145

    #1

    Kyocera 6052ci Black copies are Blank

    I am working on a Kyocera 6052with blank black copies. The customer was complaining of half of the paper was blank and the other half with text. I notice that the grey plung in the front of the developer would not go back in. I order another developer and the plunger goes back in the front of the developer but all the black copies are still blank. I have done calibration as describe on installation sheet. What could this be? Its not the drum, I installed a new black developer, I made sure the developer pins in the front were not bent, All the contact and springs in the back of the developer are there when compared to other colors
  • darry1322
    Senior Tech

    Site Contributor
    500+ Posts
    • Oct 2010
    • 817

    #2
    Re: Kyocera 6052ci Black copies are Blank

    Does the developer have a shipping sheet installed against the mag roller?

    I haven't installed a new developer in this series yet but the previous machines included a shipping sheet that would cause blank copies if it wasn't removed during installation.

    Comment

    • sparkycivic
      Trusted Tech

      250+ Posts
      • Apr 2017
      • 348

      #3
      Re: Kyocera 6052ci Black copies are Blank

      check black developer for malfunctioning "button" that engages the roller to the drum. it should click in and stay, and release with the pinch handle. otherwise, replace.

      Comment

      Working...