TA3551ci with time for maintenance (A) casette 3

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • axyun
    Service Manager

    Site Contributor
    1,000+ Posts
    • Aug 2007
    • 1323

    #1

    TA3551ci with time for maintenance (A) casette 3

    On TA3551ci Time for Maintenance (A) and Casette 3. I understand machine wants maintenance kit A (MK-8505A) changed. Why is Casette 3 also coming up.
    The tray was empty and I filled it and it appeared to be working okay. Frank
  • jcarlucci1983
    Junior Member
    • Apr 2016
    • 2

    #2
    Re: TA3551ci with time for maintenance (A) casette 3

    Check the feed rollers. They have exceeded the amount of clicks for maintenance.

    Sent from my SM-N950U using Tapatalk

    Comment

    • darry1322
      Senior Tech

      Site Contributor
      500+ Posts
      • Oct 2010
      • 817

      #3
      Re: TA3551ci with time for maintenance (A) casette 3

      Originally posted by axyun
      On TA3551ci Time for Maintenance (A) and Casette 3. I understand machine wants maintenance kit A (MK-8505A) changed. Why is Casette 3 also coming up.
      The tray was empty and I filled it and it appeared to be working okay. Frank

      MM250 is set for 150,000 for each paper tray. The warning will display when the 251 tray counter hits that number.

      You can set MM250 to 0 for the trays to disable the warning if you stay on top of your feed roller replacement.

      Comment

      • axyun
        Service Manager

        Site Contributor
        1,000+ Posts
        • Aug 2007
        • 1323

        #4
        Re: TA3551ci with time for maintenance (A) casette 3

        Thank you JCarlucci + Darry. I suspected as much but not sure as I was away from my computer and my flash drive with service manual for TA3551
        had zero bytes as when I copied to flash drive I was not careful. I will look up feed kit and let customer know. Frank

        Comment

        Working...