KM5050 Condensed copy

[cokwax]

Not sure how to describe this problem. Please see attached images. Affects mostly A3 prints and copies.copy3.jpgcopy2.jpgcopy1.jpg1.original.jpg

[Ctl-Alt-Del]

Re: KM5050 Condensed copy

Not sure how to describe this problem. Please see attached images. Affects mostly A3 prints and copies.[ATTACH=CONFIG]40572[/ATTACH][ATTACH=CONFIG]40573[/ATTACH][ATTACH=CONFIG]40574[/ATTACH][ATTACH=CONFIG]40575[/ATTACH]

More info please, we've all seen similar defects before but what are we looking at? is it a print issue or a defect with the scan? what have you tried doing already? how often does it happen?

[cokwax]

Re: KM5050 Condensed copy

More info please, we've all seen similar defects before but what are we looking at? is it a print issue or a defect with the scan? what have you tried doing already? how often does it happen?

Scans Ok. Its a print issue. All A3 prints affected. A4 only trailing 1.5inch slightly affected.

[darry1322]

Re: KM5050 Condensed copy

I've seen this issue caused by a drum drive problem before. But not on this series.

[cokwax]

Re: KM5050 Condensed copy

Problem Identified. Found a broken left door locking tab. Transfer roller not pressing well against the drum to drive paper through.