Kyocera Taskalfa 300ci jam 31

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gideon
    Trusted Tech
    • Dec 2009
    • 276

    Kyocera Taskalfa 300ci jam 31

    I have the manual.

    The paper stock at the registration roller, no image, but never when I'm there, I run 100 sheet after cleaning the switches and no jam.
    I left the office and the customer call back.

    Running u031 the switches are ok, registration and fuser switches.
    Running u032 the registration clutch operates ok.

    I suspect the registration clutch.

    The service manual point for jam 31 to loop sensor (LS), I think that sensor is only for the 40/50 series but the manual doesn't says so.
    The service manual point for switches test on U031 and it shows LS switch, there is no LS switch on the display of this machine, there is also no JDS switch (Jam detect switch) on the display.
    The switch across the transfer belt, sitting on the left door above the transfer roller is named "Fuser switch" on this machine U031 display.

    A tech before me replace the transfer kit.

    Avidentely the switch or the clutch malfunction intermittently.

    Any idea which one to replace first? Am I in the right direction?

    The part book list only the LS switch as 302H794550, is this the "fuser switch" on my machine?

    Thanks
Working...