If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi ! Everyone i have this encounted blur print on status print but when copied and send print from pc the printed copy is ok. The counter only 150k any solution suggests is appreciated.THANKYOU.
Hi ! Everyone i have this encounted blur print on status print but when copied and send print from pc the printed copy is ok. The counter only 150k any solution suggests is appreciated.THANKYOU.
that is an unusual symptom, are you saying?
-Copies off the glass and through the Doc Feeder from ALL paper sources are OK,
-Prints from a PC from ALL paper sources are OK,
-Machine generated status pages have a blur and are bad.
Which way does the blur go (front-to-back or Lead-to-trail)
Actually this is caused by eco mode under system. Today i found it thanks for reply.
Originally posted by 10871087
that is an unusual symptom, are you saying?
-Copies off the glass and through the Doc Feeder from ALL paper sources are OK,
-Prints from a PC from ALL paper sources are OK,
-Machine generated status pages have a blur and are bad.
Which way does the blur go (front-to-back or Lead-to-trail)
Comment