Kyocera ecosys m6230cidn

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • brantekcc
    Technician
    • Jan 2022
    • 45

    #1

    [Misc] Kyocera ecosys m6230cidn

    Good day

    i am in need of some assistance please , i have a Ecosys M6320cidn that we need to replace the cyan toner lock mechanism gear , does anyone maybe have a video on how this is done i have attacehd a photo of the gear needing to be repalced

    any assistance would be appreciated thank you Screenshot_20220823_125123.jpg
  • BBM
    Senior Tech

    500+ Posts
    • Dec 2020
    • 896

    #2
    Re: Kyocera ecosys m6230cidn

    The only one that i have had break was from the black toner and it was hard to remove the toner . The easiest way i have figured out was to punch out the gear on the left , the one the spring is not attached to . From the inside of the machine put a flat blade on the gear and punch it out . The only problem with that is 1 of the 2 tabs breaks but that is the only way i can replace that cracked gear without taking that whole assembly out . When installing gear make sure everything lines up like the rest of them so cartridge lines up and can be installed. Put spring back on and move gear up and down to make sure works like the other ones and toner can be installed and removed . With the 2 i have done i had to replace the developer unit and the transfer belt because gear kept breaking . Hope this helps

    Comment

    Working...