Mita DC 3060

[PWRS]

I know how to access the tech rep mode on the Mita DC 3060, (10871087). Does anyone have a copy of all of the tech rep modes for this machine? and if they do can they e-mail it to me.

Of interrest is resetting Low Temp error codes.

Thanks,

RP

[ibs boy]

One of thee engineering codes are as follow: 30363036. All the codes for simulations work in this, plus a few others that most techs do not know about.

[ibs boy]

On your low temp problem. Check your fuser temp in sim 45 to see if anyone raised the tempeture too high.

[omran]

mita 3060

salut atous j'ai une machine mita dc 3060 j'ai changer le tambour+developeur et le toner mais la copie et salle n'est pas noir (gris) merci de m'aider

[LNorris]

sim 000 then maint will give you a list of all available sims on that machine.

[omran]

mita 3060

bonjour j'ai controler sim (1087 1087 ) .45. factory set ..cont t 181..1 time 164..ag time 20 tous juste merci

[ibs boy]

Sim Codes

Hi

The back panel on the old DC 3060 copier had the sim codes on and what the factory setting were.

[imaginGuru]

The info for this machine is also included in Intravia 7th Edition.