KMC2230 (BHC350) no fiery Icon

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Desert Rat
    Service Manager

    Site Contributor
    1,000+ Posts
    • May 2008
    • 1089
    #1

    KMC2230 (BHC350) no fiery Icon

    I am having trouble getting this unit to see the fiery. The green light is
    on steady and the yellow light flashes for a short time after power on.
    The other day I was able to get an Icon on the control panel and under
    utilities. Both would display a message that the system was booting up.
    Then nothing.
    Last time I saw this unit no Icons. I went through what I had done the
    last time, but nothing.
    I am not familiar with fierys, usually I just plug it in and the machine finds
    it.
    Am I missing something?

    Thanks

    CD
    Tags: bhc350, control panel, fiery, gig, kmc2230
    • RRodgers
      Service Manager

      1,000+ Posts
      • Jun 2009
      • 1947
      #2
      I take it it's an X3e. Those have the small laptop hd's in them. After about 2 years (maybe longer) the hd's usually go out. They are 6 gig hd's usually. Sometimes 10. I think I've manage to pop a 20 in it and it worked. You'll have to put the new image on it though.
      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

        Comment

        • Desert Rat
          Service Manager

          Site Contributor
          1,000+ Posts
          • May 2008
          • 1089
          #3
          Yes,
          RRodgers it is an X3E fiery. I will have to go back and see what size the
          HDD in this unit is. I have never had to re-flash the image on any
          machine. So I will need step by step directions. Is it possible to get
          an image off that HDD, or it that one toast?

          Thanks

          DR

            Comment

            • RRodgers
              Service Manager

              1,000+ Posts
              • Jun 2009
              • 1947
              #4
              Originally posted by Desert Rat
              Yes,
              RRodgers it is an X3E fiery. I will have to go back and see what size the
              HDD in this unit is. I have never had to re-flash the image on any
              machine. So I will need step by step directions. Is it possible to get
              an image off that HDD, or it that one toast?

              Thanks

              DR
              You "MIGHT" be able to pull it out and "ghost" it. That might be easier than putting a new image on it. You can image it but you need a PC (or laptop) with a parallel port on it. The IEEE software REALLY speeds up the flashing process, you can do it without it but it will take at least 45 mins to send the files over rather than the 10~15 mins with the IEEE software.

              Plus you'll need the image. Which is at least a 400 meg ISO (if I remember correctly)
              Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                Comment

                • Desert Rat
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • May 2008
                  • 1089
                  #5
                  RRodgers,
                  I can see that I need to get a lap top with an LPT1 port. Actually I have
                  one but I back over it enough with my jeep that the screen is cracked.
                  Maybe I can get it fixed.
                  I think I can stop by and try some setting changes someone mentioned.

                  More later
                  Thanks

                  DR

                    Comment

                    Previous template Next
                    Working...